Zhangjiagang City Newellta Machinery Manufacture Co., Ltd.
Main products:Filling Machine,Beverage Machine
Products
Contact Us
  • Contact Person : Ms. Du Shengnan
  • Company Name : Zhangjiagang City Newellta Machinery Manufacture Co., Ltd.
  • Tel : 86-512-58360316
  • Fax : 86-512-58360319
  • Address : Jiangsu,Zhang Jiagang,No.1 Tongde Road, Zhaofeng Town
  • Country/Region : China
  • Zip : 215621

Bottle Blowing Machine

Bottle Blowing Machine
Product Detailed
1).Bottle Blowing 2).Automatic preform conveyer to save human cost. 3).Stable performance with advanced PLC.

Bottle Blowing Machine

XWD-A2 Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. Features of main body:1). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production. 2). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable. 3). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure. 4). Introduce the FESTO air cylinder to avoid contamination and noise. 5). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. 6). Strong clamping force with high pressure and double crank links to lock the mould. 7). Two ways of operating: automatic and manual. 8). Safe\reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand. 9). Low cost\high efficiency\easy operation and maintenance etc, profited from the fully automatic technological process. 10). Ideal cooling system make the finished bottles without any flaws. 11). Easy for you to install\test and start up. 12). Low rejection rate: less than 0.2 percent.

Model

XWD-A2

Productivity

Depend on bottle design

1800-2000PCS/H

Product type

Body diameter

20mm-100mm

Height

50mm-350mm

Neck diameter

15mm-38mm

Mold

Cavity

2cavities

Mold thick

240mm

Mold

500*500mm

Main machine power

Electrical source power

380v 3Phase /220v 3Phase  50/60HZ

Rated Power

25kw

Really use power

6kw

Air source

LP air compressor

1.0m3/min 1.0MPa

HP air compressor

0.7m3/min 3.0MPa 2set

Air dryer

1.0m3/min 3.0MPa 1set

Cooling water

Cooling water

10L/min

Size

L*W*H

1908*1280*1920mm

Weight

2000kg

Auxiliary equipment(preform unscrambler)

L*W*H

2000*950*2480mm

Weight

250kg

Resin available

PET

Main part:

Pneumatic part

Valve

SMC

Cylinder

Electric part

PLC

LG Mitsubishi

Operating system

LG /HITECH

Relay

OMRON

Infrared thermometer

America raytek

Note

All of the electrical components adopts CE\UL\CCC approved international advanced high-tech product.

Bottle Blowing Machine



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.